Fans of Windows have come a long way over many years. As a consumer, it helps to be aware of what has changed.
At the beginning of the many exclusive models are now equipped with their own charms. Most of these models also supports a wide range of parameters. Some fans have been designed with built-in przedłużaczami , helping people to protect these units in glass without any risk of vibration. Many models of Windows and was designed with built-in pins to place the fan to any stable surface, regardless of region. The more settings it has a fan, the more likely that person can change the thread cyrkulując the air in the opposite direction. Some models even has its own thermostat, so the fan regulates the temperature in each room.
Putting all these functions on the side, the main thing is that the fan should continue to run smoothly. In this spirit it is worth considering that metal blade cyrkulują the air more effectively than their plastic counterparts. It should also be noted that the voltage of the fan motor can be the most reliable way to assess the power of the explosion of this model. Finally, it is worth to do some research about the durability of each model. Assuming you found a decent fan, you want this to continue.
How to cope with the dust (aka “the Worst enemy of your fan”)
Dust is inevitable, if you own and operate a fan. Although you do not need every day to control dust, you don’t want to allow this kind of construction, which can slow and even stop, the performance of the average fan. The good news is that keeping the fan clean easily. In most cases, all you really need is a screwdriver, a vacuum hose, a little Windexu, roll of paper towels, and maybe the manual for the fan (assuming that grid look hard in the photo).
You have all these? Great! Are you ready to start. First, make sure the fan is off. When you do, remove all the screws along the front and rear grilles, so you can remove those bars. Then use your vacuum to suck all kurzowe bunnies that have accumulated in the area of the blades and the motor. Now take the Soap and paper towels to wipe all the impellers. After completing the front side, flip the fan and repeat the same process with the back. Be careful on the motor housing . Don’t want too much moisture appeared.
Go outside and play now above the grille. You can use a bucket of hot water to clean them with a brush for sink or wash pipe. You can also spray them with a hose. After removal of all dust and mold, leave the bars to dry. Last step: re-fit the grille. Your window fan is shrill and ready to use.
A brief history of fan window
The earliest incarnation of the fans dates back to 500 BC. Fans called punkahs , a kind of Indian words, pankh , which refers to the wind that occurs when a bird flaps its wings. First punkah was made of reeds of Palmyra. Loose materials were intertwined with each other, and then manually processed.
In the era of the colonial period punkah he came to describe a new kind of fans. This spectrum resembled a large flag, usually developed from rattan, which is rotated back and forth from the ceiling, cyrkulując the air every time it was prompted by the lever. Punkah was the expression of the province of the rich. Most often these devices are hung in the homes of aristocrats, where Indian servants or punkah wallahs were forced to hand control levers.
Over the next few centuries, scientists and researchers have conducted experiments based on air flow and recirculation for cooling of the environment. The first significant breakthrough in the era of modern fan occurred with the invention of the steam fan . Thirty-three years later (i.e., 1882) were the first electricians , and early twentieth century, companies began to mass produce electric fans for the home.
The industry has changed and developed over the last 50 years, particularly in response to the widespread use of air-conditioning and Central air. Despite this, fans of the window, remain an option, if not a cheap alternative for warmer climates. Modern models include from a reliable fan skrzynkowego for the entire line of exclusive fans, which include everything from air filtration to control the thermostat.